Knowledge base ยท Insulation, roofing and fitting out
Who can wire electricity to a log cabin?
Use a qualified electrician registered with a competent person scheme. In England, installing a complete new circuit from the consumer unit is notifiable work under the building regulations, which is what powering a garden cabin usually involves. A registered electrician can self-certify it and you receive a Building Regulations Compliance Certificate.
The detail
The Planning Portal's electrics building regulations page says electrical work in your garden, garage, shed or other storage building must comply with the building regulations. In England, notifiable work covers a new or replacement consumer unit, a complete new circuit, and work around baths and showers. In Wales, outdoor work is also a "special location", so even additions to existing circuits outdoors are notifiable.
If the electrician is registered with a competent person scheme, they self-certify the work, notify the council for you, and you should receive a Building Regulations Compliance Certificate within 30 days plus an Electrical Installation Certificate showing the work was tested. If they are not registered, the work has to be inspected and certified by building control or, in England only, a registered third-party certifier.
You can check registration on the electrical competent person register. GOV.UK lists the authorised competent person schemes.
Decisions about the cable type, route, depth and protection are for the electrician, who works to BS 7671. Plan the cabin's power needs (heater, computer, lighting) before you book, and tell the electrician the size of any heater you intend to use. More in our log cabin electrics guide. We do not give wiring instructions.
Where this comes from
The Planning Portal's electrics building regulations page, GOV.UK's competent person scheme list and the electrical competent person register.
Sources
Opened and checked on 15 November 2026.